Notices
 
Results 1 to 6 of 6
  1. Collapse Details
    Cudabiss DCW Brute Force 
    #1
    Member
    Join Date
    Mar 2011
    Posts
    37
    Thanks Thanks Given 
    8
    Thanks Thanks Received 
    12
    Thanked in
    10 Posts
    Total Downloaded
    0
    Here's v2.0 including a few 32 bit versions:
    PHP Code:
    http://www.sendspace.com/file/1xnv6d 

    Cudabiss user guide v 2.0

    Cudabiss22464 and Cudabiss44864 are intended for GTX460/465/470
    Cudabiss24064 and Cudabiss48064 are intended for GTX480/570
    Cudabiss25664 and Cudabiss51264 are intended for the GTX560
    (the different versions will work on all cards though)

    The file input.txt has to be placed in the same directory as the executable and has to have the exact same format for everything to work. The first 2 lines are the start/end keys. The last 2 chars of the start key are always ignored. The last 3 chars of the end key are always ignored.

    The following 3 lines are the first/second/third data packets which the user has to manually extract and enter.

    The 6th line is the amount of keys each thread calculates per round, acceptable values are: 1, 16, 32, 64, 128 where entering "1" means it will actually do 256 keys/round.

    The 7th line takes the value 0,1,2,3,4,5,6,7,9,10,11,12 or 13. 0 means it will skip all keys that include A-F, ie. it will only calculate keys that consist entirely of the numbers 0-9, in this mode the keys/round setting is ignored and it always does 100 keys/round. 1 is the "full" mode in which it calculates all keys. 2 means it will only calculate the keys that start with a number and end with a letter(eg 8b4a3d1e7c9a). 3 means it will only calculate the keys that start with a letter and end with a number(eg a5b2f8c3a4e2). 4 only calculates the keys that consist entirely of letters(eg ABCDEFAABBCC). As with mode 0, the keys/round setting is ignored in modes 2,3 & 4. In mode 4 the end key is completely ignored. To calculate all keys in modes 0,2,3 and 4 just enter 000000000000 as the start key and FF0000000000 as the end key. Mode 5 allows the user to enter the last 2 chars of the start key in input.txt (for example 000000001234), these chars remain unchanged throughout the calculation while all other chars are varied normally. Note that this is the only mode in which the last 2 chars are not ignored. Mode 6 is another version of Mode5, here it lets the last 2 chars get any numerical values(not fixed) and the other chars can take any values, useful if you know a key ends with numbers but don't know those numbers. Mode 7 is very similar to Mode 6 except that here it is the middle 2(4) chars that are limited to numbers. Mode 8 is reserved for future use . Mode 9 is like mode 1(the full mode) except that it skips all keys that were calculated by mode 7. Mode 10 skips any key containing D-F and it only calculates keys where the last char ends with "C". Mode 11 checks keys ending with ......#C#C(for example ........1A4C), it also skips D-F for the first 2/3 of the key(ie for all but the last 2 chars). Mode12 is like mode0 except that the first char can take any value(ie non-numerical values too), to calculate all keys starting with F enter FF0000000000 as the end key. Mode13 is similar to mode5 except here the middle 2 chars are read from the start key and remain the same throughout the calculation.

    While the program is running it will create a file called "lastkey.txt" every other minute or so containing the last key searched in hex format(you need a hex editor to read it). If the file lastkey.txt is in the same dir as the .exe when you start it, it will read the start key from that file, so delete it if you want to read the key from input.txt.

    Cudabiss can now calculate all the keys(to the very end), for this to work you MUST enter FFFFFF000000 as the end key in input.txt. This applies to modes 1,5,6,7,9.



    Release history:
    v2.0
    -more speed in modes 0,1,6,7 & 9

    v1.92
    -more speed in modes 1,7 & 9

    v1.91
    -more speed in modes 1,7 & 9

    v1.90
    -more speed in modes 0 & 6

    v1.89
    -some more modes probably

    v1.88
    -new mode
    -a bit more speed for some modes

    v1.87
    -new mode
    -all modes now check 3 packets

    v1.86
    -minor speed improvement
    -more modes
    -added Fermi optimized versions(for GTX460/465/470/480)

    v1.85
    -added yet another mode
    -(finally!) added a 32bit version(that hopefully works ok)

    v1.84 (never released)
    -fixed a speed problem from the 2 previous versions that was caused by a compiling issue
    -added another mode

    v1.83 (never released)
    -fixed a bug from v1.82 that was never tested properly
    -added another mode

    v1.82
    -added a third packet to more or less eliminate the chance of finding "bad" keys
    -added one more mode

    v1.81
    -fixed a bug

    v1.8
    -more speed in all modes

    v1.71
    -some bug fixes

    v1.7
    -speed improvement
    -fixed a serious bug

    v1.6
    -speed/"smoothness" improvement

    v1.51
    -fixed a nasty bug in modes 0,2 and 3

    v1.5
    -speed improvement

    v1.45
    -small speed improvement
    -remaining time calculation fixed
    -keyspan display at the beginning fixed

    v1.4
    -speed improvement
    -added a new mode(mode 4)
    -it can now be used to calculate all keys in mode 1
    -it will now display the time remaining when it saves the key(works in modes 1 & 0)
    -some other small improvements

    v1.3
    -slight speed improvement
    -added numerical/num+char/char+num key search methods
    -fixed a potential reliability problem

    v1.2
    -some bug fixes
    -automatic reading of the key from lastkey.txt

    v1.1
    -improved smoothness
    -keys/round option added to input.txt

    v1.0
    -initial release
     
     

  2. The Following 3 Users Say Thank You to italy2010 For This Useful Post:

    jojo762010 (09-29-2011), lopatinser (05-20-2011), mehde33 (05-30-2012)

  3. Collapse Details
    Re: Cudabiss DCW Brute Force 
    #2
    Newbie
    Join Date
    Sep 2011
    Posts
    1
    Thanks Thanks Given 
    2
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Total Downloaded
    0
    How to use Cudabiss?
     
     

  4. Collapse Details
    Re: Cudabiss DCW Brute Force 
    #3
    Junior Member
    Join Date
    Mar 2012
    Posts
    17
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts
    Total Downloaded
    0
    does this really work and find BISS keys on the fly?

    would you explain more on usage
     
     

  5. Collapse Details
    Re: Cudabiss DCW Brute Force 
    #4
    Newbie
    Join Date
    Jul 2012
    Posts
    3
    Thanks Thanks Given 
    3
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Total Downloaded
    0
    already downloaded... not finish for installing(error happen)very every time!

    but anyhow thank to share this.. any other more soft... pls.. let me know the

    best methods of way!!!!

    Regards
     
     

  6. Collapse Details
    Re: Cudabiss DCW Brute Force 
    #5
    Experienced Board Member skytec's Avatar
    Join Date
    Mar 2010
    Posts
    1,040
    Thanks Thanks Given 
    21
    Thanks Thanks Received 
    407
    Thanked in
    276 Posts
    Total Downloaded
    0
    This version seems to be using the numerical performance of graphics card.
    Is my post useful for you? Please press [SIGPIC][/SIGPIC]
     
     

  7. The Following User Says Thank You to skytec For This Useful Post:

    k2k (07-13-2012)

  8. Collapse Details
    Re: Cudabiss DCW Brute Force 
    #6
    Newbie
    Join Date
    Jul 2012
    Posts
    3
    Thanks Thanks Given 
    3
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Total Downloaded
    0
    Now I want DCWBruteForce1.5 (or bove versions)_csa_optimized for 64bit systems version!!

    pls. .contact to me anyone who have!!!

    I wanna buy this one!!! pls PM to me!!!
     
     

Tags for this Thread

View Tag Cloud

 
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •