Home Forums Downloads HD Satellite TV Receiver  DreamBox Satellite TV Receiver  DVB Cards Satlover Premium Servers Satlover Free Servers
Google
 
Old 03-05-2011, 09:48 PM   #1
gregorii
Premium Member
 
gregorii's Avatar

Users Flag!

 
Join Date: Jun 2010
Posts: 575
Thanks: 17
Thanked 138 Times in 103 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Clark Tech ET-9000 HD - Image

ViX Team ET9000 Image v2.1 - 05/03/2011



New VIX Image ET9000 - v2.1
05/03/2011 - Open ViX 2.1
Based on Open PLi 2.0

From VIX Team

Enigma: 04-03-2011.
Enigma Plugins: 04-03-2011.
GCC Version: 4.4.4.
Drivers: 20110214.

Team ViX Enchancements

ViX Bootlogos, Radio Logo and Shut Down Logos.
ViX Team Spinner.
ViX Team Vu_HD Skin.
ViX Team softcam manager (softcams will need to be installed manually).
ViX Team Cron Manager - Allows you to create cron jobs from scrips in / usr / script / and set them to run at pre-defined times by you. For more info, look at the screen shots below.
ViX Team Power Manager - This allows you to enable standby at a specific time, enable deep standby at specific times, do a GUI restart at specific times, or do a full reboot at specific times. If standby is set after deep standby, then it will wake the box up and return the box to the state it was before deepsleep was initiated ... For more info, look at the screenshots below.
ViX Team Device Manager - This enables you to choose where you want to mount USB Sticks, USB HDDs, etc. This can be found in Menu -> Setup -> VIX -> Device Manager. Please also note that USB / ESATA devices NEED there mount points setup in Device Manager (green button whilst in Device Manager) in order for them to work correctly.
ViX Team Image Manager - This enables you to backup and restore your image (nb, we are talking the whole image, not just settings). This can be found in Menu -> Setup -> ViX -> Image Manager. You can choose where to store your backups to, either HDD or USB. / Media / hdd / imagebackups or / media / usb / imagebackups folder (setup by pressing menu, whilst your in Image Manager).
ViX Team Overscan fix - This is the fix to remedy any overscan people had in the previous release. To use this, go to Menu -> Setup -> VIX -> Skin Settings and alter the "Menu Overscan amount" to suit your display.
ViX Team Swap Manager - Allows you to create / use swap files on usb / hdd, and also allows you to use swap partitions.
ViX-EPG - This is a simpler, faster version of CoolTVGuide, modified for the image.
ViX QuickEPG - This is VIXs' version of QuickZap. You can see the full epg data for the channel, not just now and next. Picons work within QuickEPG. Also includes channel preview.
ViX Quick Event Info - This is the new way to receive the event info on the ViX image. Press OK button once to get the info bar up, press it once more (ie a second time) to receive the information about what is currently showing ...
ViX Single EPG (with channel preview) - The is new and unique to vix, after you open the ViX single EPG (short RED) you can view the 7 day epg for that channel, now to see another channels epg, either use the Channel up / down buttons on your remote or just key in the channel number. if you want to preview the channel your currently viewing the EPG for (ie you want to see what the current program is like) just press 'OK' on your remote, this will change to that channel showing you the program in the small video window . if you don't like it, go find another channel to preview by keying in new channel number (or up / down buttons). or if you do like it and want to go fullscreen on it, just press 'OK' again. but if you feel you want to return to the original channel you where watching (whilst still in ViX Single EPG) just press' EXIT "button, this will return to where you where before you entered ViX Single EPG)
ViX Network Manager added to VIX Menu - This allows you to stop and start certain network features. The features you can stop / start are: FTP, NFS, VPN, Samba and Telnet.
USB DTT - To install dvb-t, you just need to go to the plugins downloads, and select the stick you have. This will then install the drivers for your stick. You will then need to restart your receiver. Once restarted, go to Menu -> Setup -> Service Starting -> Tuner Config, and you should notice Tuner C as your USB DTT ...
IPK Installer - Just copy your. Ipk fle into '/ tmp' and go to the menu option.
AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info.
XMLTV EPG Importer - Thanks to Rytec for his support on this Importer. This has been updated so that the Import automatically updates itself from the servers, so there is no need to download and install new source files. Thanks to Rytec for the idea and andyblac for coding it.
CrossEPG included in image as default - Settings for this can be found in Menu -> Setup -> VIX -> CrossEPG.
EPG Download from transponders - This incorporates the EIT, MHW, FREESAT, NetMed & VIASAT downloads. To enable / disable, change your settings in the Menu -> Setup -> System -> Customise.
EPG load patch - Image patched to allow EPG data to be loaded without the need for a restart.
WebInterface and Help Screens - The Web Interface Remote Control correctly shows the ET9000 remote control, with all buttons mapped correctly. As well as this, in all Help screens, the remote control has been updated to the ET9000, and all references of Dreambox removed.
Added option to disable the spinner (egg timer) - Change the setting of "Show Animation while busy" in Menu -> Setup -> System -> Customise.
Added option to disable the channel numbers in Channel List - BMCC bouquet's have Channel Numbers in their channel name, so you get them twice in channel list.
Panic Button - Added option to enable / disable panic button (goes direct to channel 1).
Subserivice Option - This option allows you to assign the Subservice shortcut to a long green press. To change this option, go to VIX Menu -> VIX Setup.
Option to disable ViX coloured buttons - This should ensure that if users want to use MultiQuick button plugin, it should work without issue
Added Wireless Lan Support - This is automatically enabled in the image. To set up, use the Network manager on first boot, or from the Menu -> Setup -> System -> Network.
NFS Server added to image and set to run automatically - To edit the folders you wish to share, you will need to edit file / etc / exports.
Network Browser - Added Network Browser to help you setup share mounts.
OpenVPN Support - This will need to be configured to your need first then use the manager to setup to autostart.
Added Smargo Support - This is automatically enabled in image.
Recorded Items - Recorded Items list modified to move item, browse directories, etc. Works similarly to suomipoeka plugin. Can be selected to load via the recorded items button, or from the tv button.
Permanent Timeshift Plugin integrated (Disabled by default, turn on via Timeshift settings).
Integrated AutoTimer
Integrated EPG Search
Integrated IMDb Search

Button Mappings

Short Red ** & *** - Show current channel EPG info (ViX Single EPG).
Long Red *** - Show current event.
Short Green ** & *** - Timers.
Long Green *** - AutoTimer Timers.
Short Yellow *** - EPG Search.
Long Yellow *** - IMDB Database.
Short Blue - Extensions.
Long Blue *** - Plugins Menu.
EPG - Opens ViX EPG.
Left / Right ** - Opens ViX QuickEPG.

** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Known Bugs

None that we know of: thumbsup:

Special thanks to the following members:

vu + nl for skinning his magic skins for ViX Team image
rytec - for his continued support.
PLi Team for their great base image and allowing us to use it.
zoka.cc for his Picon sets
Coolman and all other developers for their plugins used in the feeds of this image.
All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working: thumbsup:


Downloads

_http: / /www.megaupload.com/?d=D24WVIP0

Last edited by EUROASTRA; 07-02-2011 at 05:04 AM.
gregorii is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 03-28-2011, 02:04 PM   #2
foriyu
Banned
 
foriyu's Avatar

Users Flag!

 
Join Date: Oct 2010
Posts: 0
Thanks: 77
Thanked 216 Times in 183 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Clark Tech ET-9000 HD - Image

Clarke-Tech official Support Image V 1.1

ClarkeSupport Image Bugfix Minor-Release v1.1

Enigma2.7 from 27.03.2011
Enigma Plugins: 27-03-2011
GCC Version: 4.4.4
Drivers are updated to 22.03.2011

Bugfixes:

- WLAN Fix for rt3070
- Bugfix for WinTV Nova Panel (don't crash anymore when using WinTV Nova USBTuner Panel)
Also supports complete removal of all dependencies (used Drivers etc.) when turn off additional (third) USB DVB-T Tuner.

New Features:

- PiP Key is now enabled to support the following actions:

- Short Activate/Deactivate PiP
- Long press action: Choice between PiP Toggle Zap or PiP Setup, all others PiP-Actions can also be assigned to RC-Keys.

Use Linux API DVR-Device, please do not Upgrade Enigma2.7 until we give you an offical annoucement.

- Prepared for NFS-Server and OpenVPN Support
- Supports NTP-Client/Servermode turn off using Enigma2 Transpondertime for exclusive use
- Further shrink down Imagesize about 0,3 MB to speed up things.

Known Bugs:

RAW Audio-CD Playback
DVD-Playback
DTS-Downmix


Clarke-Tech Enhancements for the completely modular Image

- Clarke-Tech HD Lava Skin
- Clarke-Tech Bootlogos and Radio Logo
- Clarke-Tech Panel (available with Multilanguagesupport - English / German)

Please see attached Screenshoots for a short overview of all Parameters

- Best Sysinfopanel (Complete Overview of Systemparameters)
- HDMI-CEC Support via Plugin (you have to upload drivers from 20110314 to switch your TV on, if its CEC-capable)
- Sundtek USB-DVB/C/T/S2 Support

- WLAN fixes and Support for 80211b/g/n Ralink based USB-Dongles (RT73 and RT3070)
RT3070 support needs first to be switched on in CTPanel -> Systemtools -> Kernelmodules

- Running "broken" Shellscript (as Cronjobs) will work
- Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this)

Plugins added

- AutoResolution (disabled by Default)
- CrossEPG (disabled by Default)
- CoolTVGuide
- DVDPlayer

Specialized version of Multiquickbutton for Clarke-Tech ET9000

To make use of all extra buttons on Remotecontrol and several new World-exclusive Features like the 3D-Mode Button.

You can also (re)-assign the buttons mentioned completely by yourself. See Button Mappings for further details.


Button Mappings:

Red

Short: Instant record
Long: Record Selection

Green

Short: Subservice Selection
Long: Open Plugin Browser

Yellow (Wold exclusive)

Short: 3D Mode Selection (Side-by-side)
Long: Choicebox for 3D-Mode Top and Bottom and Switch 4:3 (Pillarbox) (Pan and Scan)

Blue

Short: Open Clarke-Tech CTPanel
Long: Open InfoBar Extension Selection


Channel up/Down Button:

Assigned to work as labeled on Remote Control


Cross left: Bouqetlist
Cross right: Open servicelist
Cross up: Listchannelzap +
Cross down: Listchannelzap -

Timer Button:

Short Timer
Long Timereditor

Playlist Button

Short: Mediaplayer
Long: DVDPlayer

Filelist

Open Recorded Movielist

Search Button

Short: CoolTVGuide

Mark Button

Short: Dolby Digital Downmix on/off

Guide Button

Short: InfoBar EventView
Long: Graphical Multi EPG

##########################

Known Bugs:

RAW Audio-CD Playback
DVD-Playback
DTS-Downmix


Special thanks to the following people:

Andreas Nobel aka scope34 (Main Developer)
clarkemaster (Skin & Graphics)

For all further credits see About Screen in CTPanel -> Systeminfo


No Multiboot Support. Not supported, not wanted.

[Only Registered Users Can See LinksClick Here To Register]
foriyu is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 05-02-2011, 10:13 PM   #3
sonc
Moderator
 
sonc's Avatar

Users Flag!

 
Join Date: Jun 2010
Posts: 1,534
Thanks: 451
Thanked 546 Times in 359 Posts
Say 'Thank You!' for this post. :
0 For This Post
1 Total
Default Clark Tech ET-9000 HD - Image

VIX Team ET-9000 v2.1 Backup Image

Code:
First, a new image to the usb install the latest version of cihazımıza: ET 9000 Software Installation (with USB)

After installation to be done after the installation settings:: ET 9000 Initial Installation Settings

Seilidi HDMI.
1080i is selected.
Turkish language was chosen.
DHCP on the network.

At the point where you can search the channel or canal Stock List can install this. If you want to call before you'll need to channel tuner settings.

ET 9000 Tuner configuration

For this review the following topic: ET 9000 Channel Search Works

We check the setting network.

Menu> Setup> System> Network in the "Network hardware settings" kumandamızın point to the "OK" button.

Under the section for the current settings by getting the IP address of shout. (Channel settings when you install will have to get back the value of the rope.)

Now you can install Channel Settingimizi.

ET 9000 Channel & favorite Regulatory Operations, Ready-Channel List Load


Twin VU + Duo & Solo & Xtrend ET-9000 HDTV Channel Setting 07-04-2011 (@ galaxy2002) Channel setting is loaded.

Do not forget to reboot after installing the device channel settings.

Menu> Setup> Satellite configuration> Tuner Tuner settings: Settings section to come.


Tuner A: (simple) DiSEq A / B / C / D: 42  / 13 /  7  / 19.2 
Tuner B: (advanced) DisegC 1.1: 42  / 13 /  7  / 19.2  / 39  / 9  / 4.8  / 16 

Note: Notice that after you install the tuner ayarlamızı have made our list before the channel. Thus, due to the possible setting names of different satellites have prevented errors in the satellite broadcasting can be taken.


Menu => Add-ons => Green Button (Download Extension) a pressed.
Extension information indiriliyor.Ltfen wait ... Plug-ins will be seen after a period of warning in case of Categories.


The downloadable add-ons => systemplugins autoresolution established under
The downloadable add-ons => systemplugins established under the setpasswd.
The downloadable add-ons => under extensions permanentclock
The downloadable add-ons => simplerss established under extensions
The downloadable add-ons => virtualzap established under extensions
The downloadable add-ons => vlcplayer established under extensions
The downloadable add-ons => weatherplugin established under extensions

Emu are doing the installation:

wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device, / tmp folder are sending below. Menu> Setup> VIX> IPK installer to come and "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın. Re-confirm başlatmayıda.

Enigma2-plugin-cams in the same way that we do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation.

mg_cfg file: / usr / send keys under.

Cccam.cfg file / etc folder is located. This file server uses the inside of our knowledge is required.

CCcam 2.2.1 Established | Established 1.3.5a Mgcamd | Bulsat Patch For File loaded.
Patch File for Bulsat Load:
Patched by pinkyto0o Bulsatcom mgcamd_1.35a would remove enigma2 download and unzip. Unzip the folder in the extracted
mgcamd_1.35a file via ftp / usr / softcams taking the bottom.
making the value of chmod 755.


Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette


Export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / Hacksat *

give the command.

When you want to install plugins as external. Ipk file via ftp to / tmp after kicking
Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın.

tunisiasat manager_3.0 download-addons-founded.

WebMedia plugin was downloaded. (@ Niendorfer)


Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set-up service is started: Kanal D


Download:
_http://hotfile.com/dl/116569380/0df7a53/isayuksel_backup_vix_2_1_et_9000.zip.html

Last edited by sonc; 05-02-2011 at 10:16 PM.
sonc is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 05-30-2011, 12:10 AM   #4
brandonlee
Senior Member
 
brandonlee's Avatar

Users Flag!

 
Join Date: Jun 2010
Location: spain
Posts: 172
Thanks: 9
Thanked 25 Times in 22 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Clark Tech ET-9000 HD - Image

SifTeam Enigma2 Gecko Edition et9000

Sifteam E2 gecko r42 ET9000

Code:
Description:
Image version: gecko-20110528160307
Enigma2 version: gecko-git20110603-R42
Machine: et9000
File name: gecko-openee-image-et9000-20110528160307.zip
MD5: 6af39e59859b51c084fc2c6da8c7154b
update: default skin; bootlogo; driver
Driver 5.15.2011
- Media playback improved
- Fix Xvid
- Rotor fine tune Fix

openee-gecko-image-et9000-20110528160307
_http://www.multiupload.com/03W4OHQCO2
brandonlee is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 05-30-2011, 05:03 PM   #5
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Re: Clarke-Tech Firmware

Clarke-Tech official Support Image 1.1 ET9000

Enigma2.7 from 27.03.2011
Enigma Plugins: 27-03-2011
GCC Version: 4.4.4
Drivers are updated to 22.03.2011

Bugfixes:

- WLAN Fix for rt3070
- Bugfix for WinTV Nova Panel (don't crash anymore when using WinTV Nova USBTuner Panel)
Also supports complete removal of all dependencies (used Drivers etc.) when turn off additional (third) USB DVB-T Tuner.

New Features:

- PiP Key is now enabled to support the following actions:

- Short Activate/Deactivate PiP
- Long press action: Choice between PiP Toggle Zap or PiP Setup, all others PiP-Actions can also be assigned to RC-Keys.

Use Linux API DVR-Device, please do not Upgrade Enigma2.7 until we give you an offical annoucement.

- Prepared for NFS-Server and OpenVPN Support
- Supports NTP-Client/Servermode turn off using Enigma2 Transpondertime for exclusive use
- Further shrink down Imagesize about 0,3 MB to speed up things.

Known Bugs:

RAW Audio-CD Playback
DVD-Playback
DTS-Downmix


Clarke-Tech Enhancements for the completely modular Image

- Clarke-Tech HD Lava Skin
- Clarke-Tech Bootlogos and Radio Logo
- Clarke-Tech Panel (available with Multilanguagesupport - English / German)

Please see attached Screenshoots for a short overview of all Parameters

- Best Sysinfopanel (Complete Overview of Systemparameters)
- HDMI-CEC Support via Plugin (you have to upload drivers from 20110314 to switch your TV on, if its CEC-capable)
- Sundtek USB-DVB/C/T/S2 Support

- WLAN fixes and Support for 80211b/g/n Ralink based USB-Dongles (RT73 and RT3070)
RT3070 support needs first to be switched on in CTPanel -> Systemtools -> Kernelmodules

- Running "broken" Shellscript (as Cronjobs) will work
- Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this)

Plugins added

- AutoResolution (disabled by Default)
- CrossEPG (disabled by Default)
- CoolTVGuide
- DVDPlayer

Specialized version of Multiquickbutton for Clarke-Tech ET9000

To make use of all extra buttons on Remotecontrol and several new World-exclusive Features like the 3D-Mode Button.

You can also (re)-assign the buttons mentioned completely by yourself. See Button Mappings for further details.


Button Mappings:

Red

Short: Instant record
Long: Record Selection

Green

Short: Subservice Selection
Long: Open Plugin Browser

Yellow (Wold exclusive)

Short: 3D Mode Selection (Side-by-side)
Long: Choicebox for 3D-Mode Top and Bottom and Switch 4:3 (Pillarbox) (Pan and Scan)

Blue

Short: Open Clarke-Tech CTPanel
Long: Open InfoBar Extension Selection


Channel up/Down Button:

Assigned to work as labeled on Remote Control


Cross left: Bouqetlist
Cross right: Open servicelist
Cross up: Listchannelzap +
Cross down: Listchannelzap -

Timer Button:

Short Timer
Long Timereditor

Playlist Button

Short: Mediaplayer
Long: DVDPlayer

Filelist

Open Recorded Movielist

Search Button

Short: CoolTVGuide

Mark Button

Short: Dolby Digital Downmix on/off

Guide Button

Short: InfoBar EventView
Long: Graphical Multi EPG

##########################

Known Bugs:
RAW Audio-CD Playback
DVD-Playback
DTS-Downmix

For all further credits see About Screen in CTPanel -> Systeminfo

No Multiboot Support. Not supported, not wanted.

Download_http://www.megaupload.com/?d=Q97M4F50
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-01-2011, 05:06 PM   #6
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Clark Tech ET-9000 HD - Image

ViX Team ET9000 Image v2.1 - 05/03/2011


New VIX Image ET9000 - v2.1
05/03/2011 - Open ViX 2.1
Based on Open PLi 2.0

From VIX Team

Enigma: 04-03-2011.
Enigma Plugins: 04-03-2011.
GCC Version: 4.4.4.
Drivers: 20110214.

Team ViX Enchancements

New VIX Image ET9000 - v2.1
05/03/2011 - Open ViX 2.1
Based on Open PLi 2.0

From VIX Team

Enigma: 04-03-2011.
Enigma Plugins: 04-03-2011.
GCC Version: 4.4.4.
Drivers: 20110214.

Team ViX Enchancements

ViX Bootlogos, Radio Logo and Shut Down Logos.
ViX Team Spinner.
ViX Team Vu_HD Skin.
ViX Team softcam manager (softcams will need to be installed manually).
ViX Team Cron Manager - Allows you to create cron jobs from scrips in /usr/script/ and set them to run at pre-defined times by you. For more info, look at the screen shots below.
ViX Team Power Manager - This allows you to enable standby at a specific time, enable deep standby at specific times, do a GUI restart at specific times, or do a full reboot at specific times. If standby is set after deep standby, then it will wake the box up and return the box to the state it was before deepsleep was initiated... For more info, look at the screenshots below.
ViX Team Device Manager - This enables you to choose where you want to mount USB Sticks, USB HDDs, etc. This can be found in Menu -> Setup -> VIX -> Device Manager. Please also note that USB / ESATA devices NEED there mount points setup in Device Manager (green button whilst in Device Manager) in order for them to work correctly.
ViX Team Image Manager - This enables you to backup and restore your image (nb, we are talking the whole image, not just settings). This can be found in Menu -> Setup -> ViX -> Image Manager. You can choose where to store your backups to, either HDD or USB. /media/hdd/imagebackups or /media/usb/imagebackups folder (setup by pressing menu, whilst your in Image Manager).
ViX Team Overscan fix - This is the fix to remedy any overscan people had in the previous release. To use this, go to Menu -> Setup -> VIX -> Skin Settings and alter the "Menu Overscan amount" to suit your display.
ViX Team Swap Manager - Allows you to create/use swap files on usb/hdd, and also allows you to use swap partitions.
ViX-EPG - This is a simpler, faster version of CoolTVGuide, modified for the image.
ViX QuickEPG - This is VIXs' version of QuickZap. You can see the full epg data for the channel, not just now and next. Picons work within QuickEPG. Also includes channel preview.
ViX Quick Event Info - This is the new way to receive the event info on the ViX image. Press OK button once to get the info bar up, press it once more (i.e. a second time) to receive the information about what is currently showing...
ViX Single EPG (with channel preview) - The is new and unique to vix, after you open the ViX single EPG (short RED) you can view the 7 day epg for that channel, now to see another channels epg, either use the Channel up/down buttons on your remote or just *** in the channel number. if you want to preview the channel your currently viewing the EPG for (ie you want to see what the current program is like) just press 'OK' on your remote, this will change to that channel showing you the program in the small video window. if you don't like it, go find another channel to preview by keying in new channel number (or up/down buttons). or if you do like it and want to go fullscreen on it, just press 'OK' again. but if you feel you want to return to the original channel you where watching (whilst still in ViX Single EPG) just press 'EXIT" button, this will return to where you where before you entered ViX Single EPG)
ViX Network Manager added to VIX Menu - This allows you to stop and start certain network features. The features you can stop/start are: FTP, NFS, VPN, Samba and Telnet.
USB DTT - To install dvb-t, you just need to go to the plugins downloads, and select the stick you have. This will then install the drivers for your stick. You will then need to restart your receiver. Once restarted, go to Menu -> Setup -> Service Starting -> Tuner Config, and you should notice Tuner C as your USB DTT...
IPK Installer - Just copy your .ipk fle into '/tmp' and go to the menu option.
AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info.
XMLTV EPG Importer - Thanks to Rytec for his support on this Importer. This has been updated so that the Import automatically updates itself from the servers, so there is no need to download and install new source files. Thanks to Rytec for the idea and andyblac for coding it.
CrossEPG included in image as default - Settings for this can be found in Menu -> Setup -> VIX -> CrossEPG.
EPG Download from transponders - This incorporates the EIT, MHW, FREESAT, NetMed & VIASAT downloads. To enable/disable, change your settings in the Menu -> Setup -> System -> Customise.
EPG load patch - Image patched to allow EPG data to be loaded without the need for a restart.
WebInterface and Help Screens - The Web Interface Remote Control correctly shows the ET9000 remote control, with all buttons mapped correctly. As well as this, in all Help screens, the remote control has been updated to the ET9000, and all references of Dreambox removed.
Added option to disable the spinner (egg timer) - Change the setting of "Show Animation while busy" in Menu -> Setup -> System -> Customise.
Added option to disable the channel numbers in Channel List - BMCC bouquet's have Channel Numbers in their channel name, so you get them twice in channel list.
Panic Button - Added option to enable/disable panic button (goes direct to channel 1).
Subserivice Option - This option allows you to assign the Subservice shortcut to a long green press. To change this option, go to VIX Menu -> VIX Setup.
Option to disable ViX coloured buttons - This should ensure that if users want to use MultiQuick button plugin, it should work without issue
Added Wireless Lan Support - This is automatically enabled in the image. To set up, use the Network manager on first boot, or from the Menu -> Setup -> System -> Network.
NFS Server added to image and set to run automatically - To edit the folders you wish to share, you will need to edit file /etc/exports.
Network Browser - Added Network Browser to help you setup share mounts.
OpenVPN Support - This will need to be configured to your need first then use the manager to setup to autostart.
Added Smargo Support - This is automatically enabled in image.
Recorded Items - Recorded Items list modified to move item, browse directories, etc. Works similarly to suomipoeka plugin. Can be selected to load via the recorded items button, or from the tv button.
Permanent Timeshift Plugin integrated (Disabled by default, turn on via Timeshift settings).
Integrated AutoTimer
Integrated EPG Search
Integrated IMDb Search

Button Mappings

Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red*** - Show current event.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - IMDB Database.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.

** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Known Bugs

None that we know of

Special thanks to the following members:

vu+nl for skinning his magic skins for ViX Team image
rytec - for his continued support.
PLi Team for their great base image and allowing us to use it.
zoka.cc for his Picon sets
Coolman and all other developers for their plugins used in the feeds of this image.
All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working

_http://www.megaupload.com/?d=QXCPZNRO

Last edited by lajos; 06-07-2011 at 02:40 PM.
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-03-2011, 08:22 PM   #7
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default ..::monster image:::.... Clarke tech et9000

..::monster image:::.... Clarke tech et9000

Image based on the last enigma2 Gemini Plugin + + VTi Panel

Including:

Enigma2 - CVS 13.04.2011
Drivers - 09.04.2011


All available drivers for WiFi cards
All available drivers for DVB-T / DVB-C / DVB-S2

The card will be recognized only after a reboot of the receiver!

(Do not become detected when us put me into the USB tuner is already running!)

Gemini Plugin 0.26r3
VTi Panel
TunisiaSat Addons Manager
CCPrioManager
***** Look v1.3c
DMNapi
Dream Expoler
Webinterface
MyTube
Aspect Ratio Switch
Image Viewer
DVD Player
Live Score
Cross EPG!


and much more

Infinity HD Skin
Set Picon at 13 E!
List channels

_http://netload.in/datei06fqkBYTyx.htm

Last edited by lajos; 06-07-2011 at 02:40 PM.
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-04-2011, 01:55 PM   #8
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Black Hole Clarke Tech ET-9000 v. 1.4.3 OE-BH 1.6

Black Hole Clarke Tech ET-9000 v. 1.4.3 OE-BH 1.6

Specifications:
- Drivers et9000 12. 1. 2011
-support 1080p24/25/30 and 3d resolutions
-use deinterlacer
-vfd improvements (show various symbols, use slower scroll speed)
-accelerated alpha blending
- skin: Army Gradient
- extra plugins osd
dvb-t full BlackHole support

Main functions of the buttons on the remote


OK button = Skin with simple information
OK button x 2 = Extra Info Skin
Blue button = Black Hole Blue Panel
Blue button and then Red button = Black Hole Epg Panel
Blue button and then Yellow button = System Monitor Panel
Blue button long press = Extensions
Yellow button = Time Shift
Green button = Black Hole Green Panel
Green button long press = Subservices
Green button and then Red button = Fast Plugin Setup
Green button x 2 = Fast Plugin
Button Red = Start Record


Addons


Green button and then Yellow button takes you to:-
Dedicated server for BlackHole addons
Download and install additional packages from the Black Hole server


Infobar / OSD


Analog Clock Enigma2
Channel orbital location


Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, BER
Infobar picons


Characteristics of BlackHole Panels
Blue Panel
Extra Settings


Black Hole Cron Manager (Manage schedules)
OSD Settings (OSD configuration)
Manager Kernel Modules (Kernel module operator)
Inadyn Settings (Configure Inadyn)
Swap File Settings (Configure File Swap)
Hard Disk Settings (Configure Hard Drive)
Black Hole Mount Wizard (Mount points)
OpenVPN Panel ( OpenVPN Panel)
Samba / CIFS Panel ( Samba Panel)
NFS Server Panel ( NFS server Panel)
Telnet Panel ( Telnet Panel)
FTP Panel ( FTP Panel)
Usb Tuner Panel


Info Panel
1 - E2 Setting (Enigma2 configurations)
2 - Service Information (information system)
3 - About (info)
Memory (Memory)
Space (capacity)
CPU (processor)
Process (process)


EPG Panel
Global settings (global settings EPG)
Setting Provider (ISP settings)


Green Panel


Fast Plugin Setup (Configure quick access to your favourite plugin)


Fast Plugin (Access your favourite plugin)


Addons (added)
Addons Download Manager (Manager for package downloading)
Installation manual packages (Manual installation of Black Hole packages)
Manual Install IPK packages (Manual installation of IPK packages)
Addons Uninstall Panel (Uninstalled packages)
Black Hole Statistics (See connections, top downloads and more)






Filesize : 40.99 MB

_http://www.multiupload.com/1TSXS4YIKW

Last edited by lajos; 06-07-2011 at 02:40 PM.
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-06-2011, 08:25 AM   #9
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Power of Dream HD+ Image for ET9000

Power of Dream HD+ Image for ET9000

We are pleased to offer you a POD for HD and et9000 et5000 Clarke-Tech / Xtrend. Because the manufacturer does not provide for the time cdk official image is based on OpenPlant. It is slightly different from a dream or vuplus POD HD, but it is a POD HD.

Original image from 05/06

Filesize : 42,79 MB

_http://www.filesonic.com/file/1134027611/podhd-et9000.zip

Last edited by lajos; 06-07-2011 at 02:41 PM.
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
The Following User Says Thank You to lajos For This Useful Post:
Old 06-12-2011, 06:05 AM   #10
0811974
Guest
 
0811974's Avatar

 
Posts: n/a
Total 'Thanks' Received by This User :
0 For This Post
0 Total
Default Re: Clark Tech ET-9000 HD - Image

RE: Clarke-Tech HD / Update Today 0 0

ViX Team ET9000 Image v2.2






New VIX Image ET9000 - v2.2
11/06/2011 - Open ViX 2.2
Based on Open PLi 2.0


From VIX Team

Enigma: 11-06-2011.
Enigma Plugins: 11-06-2011.
GCC Version: 4.4.4.
Drivers: 20110516.

ViX is now embedded within the image even more. A lot of settings have been moved out of the ViX menus, and incorporated within the image. Settings from previous images may not be 100% compatible, and it might be best to re-setup your image without restoring system settings for 100% reliability.

If you have previously used NetworkBrowser to mount network mounts, please remove '/etc/enigma2/automounts.xml' BEFORE tying to setup news ones.

Team ViX Enchancements

ViX Bootlogos, Radio Logo.
ViX Team Spinner.
ViX Team ViX_HD Skin.
ViX Team softcam manager - Lots of changes have been made here. You can now choose whether you want to check whether your cams are running by pressing menu in the softcam screen. You can also check the status of your cam checks by pressing the info button. Also, lots of behind the scenes checks to ensure no restarts of cams when it is actually running.
ViX Image Manager Update - This has been overhauled, and now has the option of creating a schedule to do daily, weekly or every 30 days backups for you.
ViX Cron Manager Update - This has been updated to allow more detailed and specific cron jobs to be created.
ViX Single EPG (with channel preview) - This has been updated to now support picons.
ViX Release notes - This is just a little screen within the Menu -> Information -> About, that appears when you press EPG/Info button, to tell you the latest updates for the image.
ViX Update Checker - This is a feature that lets you know of any available online updates by a little globe symbol in the infobar. This is set to check every 12 hours whether there are any updates for the image (can be changed in settings). If so, the icon will change from inactive to active...
ViX Logs Manager - This allows you to manager your crashlogs and system logs (if enabled). If you have a crash, you can email your bugs to us directly from the image. Go to Menu -> Setup -> System -> Logs. When in the Logs Manager, you can edit the configuration to show your forum username, and your email address by pressing the Menu button. Please ensure you do this before submitting logs!
ViX Settings - These are now found in the main System Menu.
ViX Simple TV List - This is a simple selection to show your bouquet lists, just showing the channels and current event (if in EPG). To access the Simple TV List, do a long up/down arrow button press. You can customised it to be the default option instead of Full Screen Channel List, in which case, Up/Down buttons are reversed. It can also be set in the ViX Settings for the TV button.
AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. This has been updated to use threading, so that it will work in the background. No more spinning when checking for lots of timers. Default behaviour has been changed so that it does not check in standby only, and will check every 30 minutes.
CCcamInfo - CCcamInfo plugin built directly in to image.
OscamInfo - OscamInfo plugin built directly in to image.
Blindscan Support Added - This allows you to access blindscan within the Service Scanning menu.
CrossEPG - Updated to latest release to allow better EPG importing.
Movie Player - Now, when playing a recorded item, you can search EPG and add Auto Timers for the particular recording. When watching your recording, press yellow to search the EPG, then press blue to add an AutoTimer.

Button Mappings

Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red*** - Show current event.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - IMDB Database.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
Long Up/Down** - Open Simple TV List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.

** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Known Bugs
"Link-Icon" in network doesn't show up (= grey instead of green).
Radio mp3 stream crashes after some time (sometimes only > 1 hour). Once that occurs, TV is also without sound. A reboot is then required. There might be a relation with Shoutcast (in use or just installed).
A second subtitle in AVI, MP4 etc doesn't show up. Debugging in E2 just stops.
In Partnerbox (remote TV-Player) the audiobutton causes a crash.6

Special Thanks

rytec - for his continued support.
PLi Team for their great base image and allowing us to use it.
zoka.cc for his Picon sets
Coolman and all other developers for their plugins used in the feeds of this image.
All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working

Code:
_http://www.mediafire.com/?tu5430kh01haps0

Last edited by EUROASTRA; 06-30-2011 at 07:30 PM. Reason: Please no live link
 
Reply With Quote
Old 06-16-2011, 08:16 PM   #11
lajos
Member
 
lajos's Avatar

Users Flag!

 
Join Date: Mar 2010
Posts: 33
Thanks: 14
Thanked 17 Times in 16 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default ET 9000 EGAMI Image V 1.0

ET 9000 EGAMI Image V 1.0


EGAMI 1.0 ET-9000

Overview:

- Image based on Oe 1.6
- Kernel 2.6.18-7.4
- Drivers 16.05.2011
- Most of USB Wifi Dongles should works
- Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles !

Installed Plugins:

- HDMI-CEC Support
- BLIND SCAN Support
- Web Interface
- MyTube Player
- FAN Setup
- OSD 3D Setup
- OSD Position setup
- Cross EPG SVN 300

Buttons Mapping:

OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS )
OK button x 2 = Extra Info Skin
Blue button = EGAMI Blue Panel
Blue button and then Yellow button = INFO Panel
Blue button and then Blue button = EGAMI Settings
Blue button long press = Extensions
Yellow button = Time Shift
Green button = EGAMI Green Panel
Green button long press = Subservices
Green button and then Red button = ADDONS
Green button x 2 = EGAMI Settings
Green button and then Yellow button = FILE MANAGER
Green button and Blue button = SCRIPTS
Button Red = EPG List
Button PIP = Turn ON / OFF PIP
Button PIP long press = PiP Menu - Move/Switch Windows


Infobar:
- CAM Name
- ECM INFO
- NETCARD INFO
- CA INFO
- TUNER INFO
- CHANNEL INFO
- NEXT EVENT INFO ( in channel list !! )
- AnalogicClock renderrer
- Lite and Full infobar skin

much, much and more...


Egami Panel include:



- Green button and then Red button takes You to EGAMI ADDONS MANAGER

--> Download Egami Addons - Download extensions from Egami Server
--> Manual Egami Addons Install - Install packages from /tmp
--> Remove Egami Addons - Remove installed packages
--> Download GUI Addons - Download CVS Extensions
--> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: _http://your-feed-url...log_enigma2.xml)


- 2x Green button takes You to EGAMI Extras

--> Kernel Modules Manager - start/stop kernel modules
--> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!!
--> Services Panel - here You can Start/Stop/Check Status/Setting up:
+ NFS Server
+ HTTPD
+ Inadyn
+ Cron
+ DjMount ( UpNp Client )
+ uShare ( UpNp Server )
+ Syslog
+ Samba
+ OpenVPN
+ FTP
+ Telnet
+ Pcscd

--> Mount manager - here You can mount Your networks share - CIFS/NFS
--> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?"
--> Swap File settings - make Your swap file
--> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more...
--> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info
--> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID


- Green button and then Yellow button run EGAMI FILE MANAGER


--> You can Move/Copy/Remove/Rename Your files inside Your Box !
--> You can Create New Directory/New Text File/New Symlink !
--> You can change Permission of the files !
--> You can play all movies and music directly from Egami File Manager !
--> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager !
--> You can start SHELL scripts
--> You can start PYTHON scripts
--> You can view most type of files by pressing OK
--> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON...

- Green button and then Blue button run EGAMI Scripts Panel

--> You can run all scripts from /usr/scripts/
--> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel

Credits
Thanks to the group of Beta Testers.
Thanks to Rytec for providing us with the server with all epg.dat files.
Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG
Thanks to Skaman from SiF Team for extuner and usbloader










Filesize : 49,80 MB

_http://www.xtrend-community.com/image-feed/images/egami-image-1.0-et9000-20110616075710.zip

Last edited by lajos; 06-17-2011 at 08:19 AM.
lajos is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-19-2011, 03:02 AM   #12
manikr
Experienced Board Member
 
manikr's Avatar

Users Flag!

 
Join Date: Jul 2010
Posts: 1,450
Thanks: 101
Thanked 164 Times in 134 Posts
Say 'Thank You!' for this post. :
0 For This Post
1 Total
Default Re: Clarke-Tech Update

Cam Pack for the Egami Image-Clark Tech ET-9000 HD-
Cam Pack for the Egami Image

cam3 3908
cccam 2.2.1
cccam 2.2.1 & oscam 4642
gbox 2.25
hypercam 2.1.1
mgcamd 1.35
mgcamd 1.35a
scam 3.60

Only for Egami Image!

-http://www.multiupload.com/R0UI5Y4986
manikr is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-29-2011, 08:28 PM   #13
sonc
Moderator
 
sonc's Avatar

Users Flag!

 
Join Date: Jun 2010
Posts: 1,534
Thanks: 451
Thanked 546 Times in 359 Posts
Say 'Thank You!' for this post. :
0 For This Post
1 Total
Default Re: Clark Tech ET-9000 HD - Image

EGAMI 1.1 ET-9000


Overview:

- Image based on OE 1.6
- Kernel 2.6.18-7.4
- Drivers 27.06.2011
- Most of USB Wifi Dongles should works
- Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles !



What's new ???



- Image include latest Front Processor
- image include latest Bootloader


- Latest Drivers

-increase framebuffer acceleration memory size
-always downmix audio on analog outputs
-support /proc/stb/fp/was_timer_wakeup (needs frontpanel update)
-vcr scart detection fix
-vfd improvements
-vfd: support greek and cyrillic charsets
-vfd: support additional symbols (see /proc/stb/lcd/*)
-pcm playback improvements
-sci improvements
-DVD Menu works OK - from ISO files also

- Latest GUI
- Latest GUI-Plugins

- Added AC3+ / Dolby Digital + Support
- Added zapUp /zapDown -> LEFT / RIGHT arrow
- Added default cable.xml - thx pr2
- Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 )
- Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash
- Added in Mount Manager option to mount by UDP and TCP
- Added animated pixmaps when We press RED to start CAM
- Added in Decoding Setup -> Option to disable CI messages
- Added Subtitles Menu on Subtitiles Button
- Added Sleep Timer Menu on Timer Button
- Added *.MTS extensions in MediaPlayer
- Added Videoenhacement Plugin

- Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc...

This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!!

- Updated skin by Mimi
- Updated French language by Mimi
- Updated French language CrossEPG by Mimi

- Fixed removing files from FLASH by EGAMI File Manager
- Fixed Software Manager -> Install Local IPK
- Fixed Marker
- Fixed Button SAVE in FileManager Settings

- Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running )
- Fixed SoftCams change- it is 2 times faster now


Installed Plugins:

- HDMI-CEC Support
- BLIND SCAN Support
- Videoenhacement Plugin
- Web Interface
- MyTube Player
- FAN Setup
- OSD 3D Setup
- OSD Position setup
- Cross EPG SVN 300

Buttons Mapping:

OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS )
OK button x 2 = Extra Info Skin
Blue button = EGAMI Blue Panel
Blue button and then Yellow button = INFO Panel
Blue button and then Blue button = EGAMI Settings
Blue button long press = Extensions
Yellow button = Time Shift
Green button = EGAMI Green Panel
Green button long press = Subservices
Green button and then Red button = ADDONS
Green button x 2 = EGAMI Settings
Green button and then Yellow button = FILE MANAGER
Green button and Blue button = SCRIPTS
Button Red = EPG List
Button PIP = Turn ON / OFF PIP
Button PIP long press = PiP Menu - Move/Switch Windows


Infobar:
- CAM Name
- ECM INFO
- NETCARD INFO
- CA INFO
- TUNER INFO
- CHANNEL INFO
- NEXT EVENT INFO ( in channel list !! )
- AnalogicClock renderrer
- Lite and Full infobar skin

much, much and more...


Egami Panel include:



- Green button and then Red button takes You to EGAMI ADDONS MANAGER

--> Download Egami Addons - Download extensions from Egami Server
--> Manual Egami Addons Install - Install packages from /tmp
--> Remove Egami Addons - Remove installed packages
--> Download GUI Addons - Download CVS Extensions
--> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: [Only Registered Users Can See LinksClick Here To Register] )


- 2x Green button takes You to EGAMI Extras

--> Kernel Modules Manager - start/stop kernel modules
--> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!!
--> Services Panel - here You can Start/Stop/Check Status/Setting up:
+ NFS Server
+ HTTPD
+ Inadyn
+ Cron
+ DjMount ( UpNp Client )
+ uShare ( UpNp Server )
+ Syslog
+ Samba
+ OpenVPN
+ FTP
+ Telnet
+ Pcscd

--> Mount manager - here You can mount Your networks share - CIFS/NFS
--> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?"
--> Swap File settings - make Your swap file
--> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more...
--> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info
--> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID

- Green button and then Yellow button run EGAMI FILE MANAGER


--> You can Move/Copy/Remove/Rename Your files inside Your Box !
--> You can Create New Directory/New Text File/New Symlink !
--> You can change Permission of the files !
--> You can play all movies and music directly from Egami File Manager !
--> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager !
--> You can start SHELL scripts
--> You can start PYTHON scripts
--> You can view most type of files by pressing OK
--> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON...


- Green button and then Blue button run EGAMI Scripts Panel

--> You can run all scripts from /usr/scripts/
--> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel



Credits
Thanks to the group of Beta Testers.
Thanks to Rytec for providing us with the server with all epg.dat files.
Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG
Thanks to Skaman from SiF Team for extuner and usbloader


DISCLAIMER

THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

LICENSE (TERM OF USE)

THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.


Download:

_http://www.megaupload.com/?d=Q0WP3UB8
sonc is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 06-30-2011, 11:17 AM   #14
zollie
Member
 
zollie's Avatar

Users Flag!

 
Join Date: Apr 2011
Posts: 66
Thanks: 4
Thanked 41 Times in 34 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Clarke-Tech MOD 1.3 Image

based: OPENPLI Nightly Build 29.06.2011

Clarke-Tech Enhancements for the completely modular Image
- Clarke-Tech HD Lava Skin
- Clarke-Tech Bootlogos and Radio Logo
- Clarke-Tech Panel (available with Multilanguagesupport - English / German)

Please see attached Screenshoots for a short overview of all Parameters

- Best Sysinfopanel (Complete Overview of Systemparameters)
- HDMI-CEC Support via Plugin
- Sundtek USB-DVB/C/T/S2 Support

- WLAN fixes and Support for 80211b/g/n Ralink based USB-Dongles (RT73 RT3070 and RT8712u)

- Running "broken" Shellscript (as Cronjobs) will work
- Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this)

- Blindscan Support

Plugins added

- AutoResolution (disabled by Default)
- CrossEPG (disabled by Default)
- CoolTVGuide 4.0 (thx Coolman)
-FanSetup
-EnhancedMovieCenter (Thx Coolman)
-SoftcamSetup
- DVDPlayer
-AutoTimeShift

Specialized version of Multiquickbutton for Clarke-Tech ET9000
To make use of all extra buttons on Remotecontrol and several new World-exclusive Features like the 3D-Mode Button.

You can also (re)-assign the buttons mentioned completely by yourself. See Button Mappings for further details.

_http://www.megaupload.com/?d=HMDTR3BK
zollie is offline  
Say 'Thank You!' for this post.
Reply With Quote
Old 07-24-2011, 01:42 PM   #15
arsamj1981
Banned
 
arsamj1981's Avatar

Users Flag!

 
Join Date: Sep 2010
Location: iran
Posts: 804
Thanks: 99
Thanked 195 Times in 166 Posts
Say 'Thank You!' for this post. :
0 For This Post
0 Total
Default Re: Clark Tech ET-9000 HD - Image

Power of Dream HD+ Image for ET-9000

24-07-2011

Changes:

- Routine Update

_http://hotfile.com/dl/124895542/e8bcd20/podhd-et9000.zip
arsamj1981 is offline  
Say 'Thank You!' for this post.
Reply With Quote
Reply

Tags
clark, et9000

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT. The time now is 08:06 PM.


Powered by vBulletin® Version 5.2.1 Special edition
Copyright ©2010 - 2014, vBulletin Solutions, Inc.
These are the 100 most searched terms
Search Cloud
allshares.dat antr@g forum sat btkcam c cccam.satlover.com cardsharing server cccam 2.3.0 cccam exchange cccam exchange local cccam prio cccam satlover cccam server cline tester cccam.cfg cccam.prio cccam.satlover.com cccam2.satlover.com cline free cline tester cudabiss dreambox keys dyndns 12000 forum dyndns 12000 forum 2012 errore 9995 free c lines free cardsharing server free cline free clines gigablue quattro http://www.satlover.com/forum nascam openbox s12 oscam.tiers progdvb channel list 2012 sat lover sat lovers satlover satlover cccam satlover forum satlover forums satlover-cccam.zip satlover.com satlovers satlovers forum satlver sky cardsharing sunray 800 hd se sunray 800se vhannibal vu+ duo2 www.satlover.com www.satlovers.com ... powered by Satlover Software Home

Search Engine Friendly URLs by vBSEO 3.3.0
 
hit counter script

Satlover Software Home ©2007-2010 Satlover Software Home